HOVI TIPS & AERATORS  |  TKVOX COMM / AMPLIFIER KITS  |  COOLING FANS  |  CLONE TROOPER GEAR  |  E-11 BLASTERS  |  DISPLAY STANDS

SORRY, ALL OF OUR PRODUCTS ARE CURRENTLY UNAVAILABLE.

BLASTECH E-11 LIGHTWEIGHT TROOPING BLASTERS
BLASTERS CURRENTLY UNAVAILABLE


Cick on any image below to zoom

Stormtrooper Blastech E-11 Lightweight Trooping Blaster. No light or sound effects.

SORRY, CURRENTLY UNAVAILABLE.


UK: £

Despatch time between 5 and 15 working days. Delivered by Special Delivery.

International: £

Despatch time between 5 and 15 working days. Delivered by international courier service.


THIS IS NO ORDINARY PIPE BLASTER... OUR PIPE BLASTER IS FITTED WITH FIRST GENERATION CAST PARTS FROM A STERLING SUB MACHINE GUN. OTHER PARTS ARE ALSO FROM ORIGINAL COMPONENT CASTS. IT IS DESIGNED AND MANUFACTURED TO CLOSELY MATCH THE ORIGINAL E-11'S IN STAR WARS. LOVINGLY CREATED FOR YOUR SATISFACTION!

Key features:
  • Manufactured to scale with first generation cast parts including all fine detail. The mag holder even has the original Sterling serial and part numbers.
  • Muliti-coat paint finish with intermediate laquer. Designed to look like an original Sterling SMG with crinkle paint finish. Overall matt finish and metallic silver painted parts.
  • Reticle fitted inside scope, based on original design. Reflective gloss varnish to front lens to simulate glass lens.
  • Aluminium scope rail with captive end bolt fittings.
  • Overall weight 710g.
  • Lightweight design so it can carried or holstered during a full day of trooping.
  • Balanced design so the blaster can be held with one hand.
  • High quality T-Track moulded into barrell holes.

Care of your blaster:

  • It is unwise to drop your blaster because it is made with many resin parts. Whilst the resin is slightly flexible, if the blaster is dropped parts may chip or even break. So, don't drop it.
  • Use a mild detergent or wet wipe to clean the blaster. Then finish with a lint free cloth – even a soft towel will do the job. Never use an abrasive cleaner or agressive etching agent.
  • Do not place on an abrasive surface. This will scratch your blaster and may remove layers of paint. However, minor paint wear may be attractive to some troopers as it will appear to be weathered.
  • Keep it out of direct sunlight if temperatures exceed 45 degrees centigrade (very hot). Many parts are attached using a highly flexible heat glue.
  • It is a good idea to keep the blaster in a protective bag.

Replacement parts:

  • Minor replacement parts may be ordered, e.g. a cocking lever.
  • Other parts are glued, pinned or screwed in place so servicing or replacing is a complexl task. 501st Creations are happy to undertake repairs. Please contact us for a quote.
  • Please allow 15 working days for parts to be ordered and despatched.